Building Chemicals
YAPIFIX is a cement based ceramic tile adhesive with reduced slip.
ADVANTAGES
*Easy to apply.
*High adhesion strength
*Reduced slip
SURFACE PREPARATION
*All substrates must be strong ,dry, clean and free from oil, grease,dust .
*Surface irregularities, cracks and holes should be repaired by YAPIPLUS, ATIŞKAN Repair Mortar.
*The substrates must be primed with BETONTAK before bonding of tiles on existing ceramic tiles.
FIELDS OF APPLICATION
It is applied on the cement based plaster, screed and concrete on the horizontal and vertical surfaces.
APPLICATION
Pour 25 kg of YAPIFIX into 6-7 litres of clean water slowly and mix with a low speed mixer to obtain a homogeneous mixture free from lumps. Allow the mortar to rest for 5 minutes. Mix it again prior to the application.Spread the mortar onto the substrate then notch with the toothed side of trowel. Application of large tiles YAPIFIX should be applied also on the back of tiles.
APPLICATION CONDITIONS
*Application temperature range of 5oC - 35oC.
*It should not be applied to the surfaces subject to the risk of freezing.
*Avoid of application when the weather is too humid or too hot.
WARNINGS AND PRECAUTIONS
*The specified times are for the ambient temperature at 20oC; it takes longer at lower temperature, and shorter at high temperature.
*Never add any foreign materials.
*Clean all tools and hands with water after application.
PERFORMANCE
Initial Tensile Adhesion Strength | ≥0,5 N/mm2 |
Tensile Adhesion Strength After immersion in Water | ≥0,5 N/mm2 |
Tensile Adhesion Strength After heat exposure | ≥0,5 N/mm2 |
Tensile Adhesion Strength After Freeze-Thaw Cycle | ≥0,5 N/mm2 |
Open Time (after 20 minutes ) | ≥0,5 N/mm2 |
Slip | 0,5mm |
Reaction to fire | A1 |
Pot life | 2 hours (at 20oC) |