Building Chemicals
A-THERM 101 is a fiber reinforced, cement based thermal insulation panel adhesive with excellent bonding strength.
ADVANTAGES
*Easy to prepare and apply
*Perfect adhesion
APPLICATION SURFACES
A-THERM 101 can be used as adhesive for all kind of heat insulation sheets on the bricks, cement based plasters, gas concrete and similar surfaces.
APPLICATION CONDITIONS
*Application temperature range of 5oC - 35oC
*Avoid of application on the surfaces subject to the risk of freezing.
*It should not be used on substrates which are weak and low resistance.
SURFACE PREPARATION
All substrates must be strong ,dry ,clean and free from oil, grease,dust . If needed repair the surface with Atışkan YAPIPLUS to get a sound and flat surface two days before the application
APPLICATION
Pour 25 kg of A-THERM 101 into 5,5-6,5 litres of clean water slowly and mix with a low speed mixer to obtain a homogeneous mixture free from lumps.
After resting it for 5 minutes remix it for 1-2 minutes. A-THERM 101 is reday to use.
Apply A-THERM 101 to the back side of the sheet as a strip and also a point on the center of the sheet .
A-THERM 101 should be applied all around of insulation board and 5 mm of space should be left from the edges all around the board. Show attention that minimum 40% of the insulating board is covered by the adhesive.
Then, fix the sheets onto the wall by pressure. During installation check the level of the panels with a gauge.
POT LIFE
2 Hours (20°C)
APPLICATION TOOLS
Hand Mixer, Trowel,Toothed Trowel
WARNINGS AND PRECAUTIONS
Insulation panels should be placed each other closely, gaps between panels should be as few as possible.
CONSUMPTION
4-6 kg/m²
SHELF LIFE
1 year from the manufacturing date at a moisture-free and dry place
PERFORMANCE
| Mass per unit volume of fresh mortar | ≥ 1000 kg/m3 | |
| Granulometry: The percentage left on the 1mm sieve | ≤ % 1,0 | |
| Adhesion to the Thermal Insulating Board | ≥ 0.8 N/m2 | |
| Tensile Adhesion Strength | ||
| Initial | ≥ 0.5 N/m2 | |
| After immersion in water | ≥ 0.5 N/m2 | |
| After heat exposure | ≥ 0.5 N/m2 | |
| After freeze/thaw cycles | ≥ 0.5 N/m2 | |
| Open Time | 15 min. | |
POT LIFE
2 Hours (20°C)
APPLICATION TOOLS
Hand Mixer, Trowel, Toothed Trowel
PACKAGING
25 kg Kraft Sack
PALLET
105x105cm x 80 ±10cm
64 pcs. / 1600kg
