Building Chemicals

YAPIFIX is a cement based ceramic tile adhesive with reduced slip.

ADVANTAGES

*Easy to apply.
*High adhesion strength
*Reduced slip

SURFACE PREPARATION

*All substrates must be strong ,dry, clean and free from oil, grease,dust .
*Surface irregularities, cracks and holes should be repaired by YAPIPLUS, ATIŞKAN Repair Mortar.
*The substrates must be primed with BETONTAK before bonding of tiles on existing ceramic tiles.

FIELDS OF APPLICATION

It is applied on the cement based plaster, screed and concrete on the horizontal and vertical surfaces.

APPLICATION

Pour 25 kg of YAPIFIX into 6-7 litres of clean water slowly and mix with a low speed mixer to obtain a homogeneous mixture free from lumps. Allow the mortar to rest for 5 minutes. Mix it again prior to the application.Spread the mortar onto the substrate then notch with the toothed side of trowel. Application of large tiles YAPIFIX should be applied also on the back of tiles.

APPLICATION CONDITIONS

*Application temperature range of 5oC - 35oC.
*It should not be applied to the surfaces subject to the risk of freezing.
*Avoid of application when the weather is too humid or too hot.

WARNINGS AND PRECAUTIONS

*The specified times are for the ambient temperature at 20oC; it takes longer at lower temperature, and shorter at high temperature.
*Never add any foreign materials.
*Clean all tools and hands with water after application.

PERFORMANCE

Initial Tensile Adhesion Strength ≥0,5 N/mm2
Tensile Adhesion Strength After immersion in Water ≥0,5 N/mm2
Tensile Adhesion Strength After heat exposure ≥0,5 N/mm2
Tensile Adhesion Strength After Freeze-Thaw Cycle ≥0,5 N/mm2
Open Time (after 20 minutes ) ≥0,5 N/mm2
Slip 0,5mm
Reaction to fire A1
Pot life 2 hours (at 20oC)