Plaster Boards

Class A1 Fireproof Plasterboard is composed of noncombustible gypsum core of high purity reinforced by the special glass fiber and additives with the special fireproof fiberglass mat at our high technology production line.

ADVANTAGES

*With its impact strength enhanced by use of special glass mat and made fireproof, it also allows having a smooth surface and excellent base for decorative applications.

*It minimizes problems arising from handling, application and use due to its high resistance,

*As a ‘breathable’ material, it balances the ambient humidity and helps formation of healthy environments.

*Besides being easy to prepare, apply and disassemble, it helps make savings on time and labor, allowing passing the installation and insulation materials through the application cavities.

*Compared to the conventional wall applications, it considerably decreases the building wall loads and reduces the beam, column and floor sizes, thus minimizing the construction costs.

*As it is fireproof Class A1 material, it protects against fire. With its performance and endurance period during fire, it allows formation of emergency response corridors. It minimizes the damage that the building bearing components may suffer.

APPLICATION SURFACES

Partition walls, cladding walls, shaft walls, building components and suspended ceilings.

APPLICATION CONDITIONS

*It should not be applied under conditions at 4oC and below.

*The application should be made by auxiliary materials which should be in accordance with the standart.

SURFACE PREPARATION

The application surface should be made free of any dust, dirt, grease, paint and weak decoration products. If required,
the application surface is fixed with Esfix Joint Filling Mortar.

WARNINGS AND PRECAUTIONS

*For partition wall applications, maximum framing spacing should be 60 cm. in dry condition. In case of wet area, high wall and load bearing application, the framing spacing should be reduced down to 30cm. Depending on the conditions, DC profile width should be increased.

*For ceiling applications, the profiles are connected to the board direction as a parallel, the framing spacing should be 40 cm., If the connection is vertical, It should be 50 cm.

APPLICATION RESTRICTIONS

*When high level sound and thermal insulation is required, it should be used together with proper insulation material. For ceiling application, you should use extra fastening components.

*Any damaged board and auxiliary materials should be renewed and application should not be made by any defective materials.

STORAGE CONDITIONS

In order that the plasterboards are not damaged, store them on a flat and clean floor also It will not contact directly with the ground and should be stored in areas that offer protection against adverse conditions (condensation, humidity, etc.)

TECHNICAL CHARACTERISTICS

Length

2000 - 3600 mm

Width

1200 mm

Thickness

12.5 mm

15 mm

Average Weight

≤ 11,5 kg/m²

≤ 13,5 kg/m²

Flexural Strength (Perpendicular to Paper Fibers)

≥ 725 N

≥ 870 N

Flexural Strength (Parallel to Paper fibers)

≥ 300 N

≥ 360 N

Type of edge

IK (Tapered edge) – KK (Square Edge)

Thermal Conductivity Value (λ)

0.25 W/mK

Fire Class

A1

Coefficient of resistance to Water Vapor Transmission

10

Standard

TS EN 15283-1

PACKAGING

Thickness

9.5 mm

12.5 mm

15 mm

Pallet/Board

60 pcs./Pallet

50pcs./Pallet

40 pcs./Pallet