Powder Plaster Products

Description

It is a gypsum-based adhesive mortar which can be used to bond gypsumboard, insulation panels etc. construction materials for interior sites.

Benefits

  • High durability and adhesion strength.
  • A1 class non-combustible material.

Application Areas

It can apply to brick, concrete, gas concrete, briquet etc. surfaces

Application Conditions

  • Ambient temperature must be at least +5oC.
  • Sections should be closed which causes air-flow.

Surface Preparation

· Dry and hot surfaces should be wetted.

· Surfaces should be cleaned from subtances (dust, dirt, oil, paint, etc.) which are preventing adhesion of plaster.

· Atışkan Betontak Plaster Primer should be used to improve adhesion on ceilings, smooth and absorbent surface applications.

Application

· Fill fresh water into a clean container according to amount of mixture will prepared, approx. 5lt Water / 10kg Atışkan Adhesive Plaster sprinkles to cover the surface of water.

· After waiting for 2 minutes, slurry is stirred until it becomes homogeneous.

· The mixture is ready to be used within 30 minutes.

· Ready mixture should be apply at fist size with 25cm gap, starts from corner to cover board’s bonding surface.

· Boards should be pressed to the surface with a straight-edge and spirit level should be checked.

Cautions

· Do not add any other material (lime, sand, etc.) into mixture.

· The bonding surfaces should not be exposed to moisture and water.

· Avoid contact with skin and eyes. In case of contact wash with plenty of water.

Application Limit

Do not use any place except where application areas noted.

Consumption
6kg Atışkan Adhesive Plaster for each 1m2 gypsumboard.

Shelf Life

6 months for storage in closed bag and humidity proof conditions.

Technical Specifications

Mixture Ratio 5lt Water / 10kg Atışkan Adhesive Plaster
Workability 30 minutes
Setting Time 70 minutes
Fire Class A1
Standard TS EN 14496