Powder Plaster Products
Description
It is a gypsum-based mortar with perlite which can be apply between 10-30mm thickness onto interior walls and ceilings by machine spraying.
Benefits
- Gives smooth and brilliant surface ready to paint with one coat application.
- Reduces application process, save time and labour.
- Stabilize ambient humidity.
- Helps heat and sound insulation.
- A1 class non-combustible material.
Application Areas
It can apply to brick, concrete, gas concrete, briquet etc. surfaces.
Application Conditions
- Ambient temperature must be at least +5oC.
- Sections should be closed which causes air-flow.
Surface Preparation
· Fractures, cracks and defects should be corrected on surface.
· Dry and hot surfaces should be wetted.
· Surfaces should be cleaned from subtances (dust, dirt, oil, paint, etc.) which are preventing adhesion of plaster.
· Atiskan Betontak Plaster Primer should be used to improve adhesion on ceilings, smooth and absorbent surface applications.
Application
· Pour Atışkan Machine Spray Plaster into a machine container. Water ratio is adjusted by valve according to consistency.
· Metal bears should be used on walls to get the best result without wastage.
· Ready mixture can spray horizontally between metal bears and spread to the surface with a metal straight-edge by first levelling.
· After 30 minutes of the first levelling, second levelling should be apply on surface.
· After 45 minutes of the second levelling, surface is wetted and floated with rubber trowel.
· After 15 minutes of the floating process, obtain a smooth final surface with stell trowel.
Cautions
· Do not add any other material (lime, sand, etc.) into mixture.
· Water adjustment of machine should be checked frequently.
· Avoid contact with skin and eyes. In case of contact wash with plenty of water.
Application Limit
Do not use any place except where application areas noted.
Consumption
10kg/m2 Atışkan Machine Spray Plaster for each 1cm thickness.
Shelf Life
6 months for storage in closed bag and humidity proof conditions.
Technical Specifications
Mixture Ratio | 5lt Water / 10kg Atışkan Machine Spray Plaster |
Setting Time | 180 minutes |
Fire Class | A1 |
Standard | TS EN 13279 |