Powder Plaster Products
Description
It is a gypsum-based final coat finishing mortar which can be apply between 0-2mm thickness onto interior walls and ceilings by hand.
Benefits
- With the fine particule structure, obtains silky and esthetic texture.
- The smooth surface provides saving which prepared for painting.
- A1 class non-combustible material.
Application Areas
It can apply on concrete, gas concrete, plaster, gypsumboard etc. surfaces.
Application Conditions
- Ambient temperature must be at least +5oC.
- Sections should be closed which causes air-flow.
Surface Preparation
· Dry and hot surfaces should be wetted.
· Surfaces should be cleaned from subtances (dust, dirt, oil, paint, etc.) which are preventing adhesion of plaster.
Application
· · Fill fresh water into a clean container according to amount of mixture will prepared, approx. 7lt Water / 10kg Atışkan Satin Finishing Plaster sprinkles to cover the surface of water.
· After waiting for 2 minutes, slurry is stirred until it becomes homogeneous.
· The mixture is ready to be used within 60 minutes.
· Ready mixture is applied from bottom to up and right to left, two-way scraping with steel trowel.
Cautions
· Do not add any other material (lime, sand, etc.) into mixture.
· Avoid contact with skin and eyes. In case of contact wash with plenty of water.
Application Limit
Do not use any place except where application areas noted.
Consumption
1kg/m2 Atışkan Satin Finishing Plaster for each 1mm thickness.
Shelf Life
6 months for storage in closed bag and humidity proof conditions.
Technical Specifications
Mixture Ratio | 7lt Water / 10kg Atışkan Satin Finishing Plaster |
Workability | 60 minutes |
Setting Time | 150 minutes |
Fire Class | A1 |
Standard | TS EN 13279 |