Description

It is a gypsum-based joint filler which can be apply between 0-5mm thickness onto interior gypsumboard joints by hand.

Benefits

• Flexibility feature prevents cracking on joints.
• Creates a smooth surface.
• A1 class non-combustible material.

Application Areas

It can apply on gypsumboard joints, wall joints, crack surfaces etc. gaps for filler.

Application Conditions

• Ambient temperature must be at least +5^oC.

• Sections should be closed which causes air-flow.

Surface Preparation

Surfaces should be cleaned from subtances (dust, dirt, oil, paint, etc.) which are preventing adhesion of plaster.

Application

· Fill fresh water into a clean container according to amount of mixture will prepared, approx. 6,5lt Water / 10kg Atışkan Joint Filling Plaster sprinkles to cover the surface of water.

· After waiting for 2 minutes, slurry is stirred until it becomes homogeneous.

· The mixture is ready to be used within 60 minutes.

· Atışkan Joint Tape is bonded to the center of gypsumboards joints.

· Ready mixture is applied on the joint tape with spatula, filled the gaps of screws.

Cautions

· Do not add any other material (lime, sand, etc.) into mixture.

· Avoid contact with skin and eyes. In case of contact wash with plenty of water.

Application Limit

Do not use any place except where application areas noted.

Consumption
200gr. Atışkan Joint Filling Plaster for each 1m² gypsumboard.

Shelf Life

6 months for storage in closed bag and humidity proof conditions.

Technical Specifications

Mixture Ratio	6,5lt Water / 10kg Atışkan Joint Filling Plaster
Workability	60 minutes
Setting Time	140 minutes
Fire Class	A1
Standard	TS EN 13963

• 
• 
• 
• 
•